Coarse filter

1. The core part of the filter is the filter element. The filter element is composed of filter material, frame and stainless steel wire mesh. Stainless steel wire mesh is easy to damage and needs special protection.

2. When the filter works for a period of time, some impurities are deposited in the filter element. When the pressure drop increases and the flow rate decreases, impurities in the filter element need to be removed in time.

3. When cleaning impurities, pay special attention that the stainless steel wire mesh on the filter element shall not be deformed or damaged. Otherwise, the purity of the filter medium cannot meet the design requirements, and the compressor, pump, instrument and other equipment will be damaged.

4. If the stainless steel wire mesh is deformed or damaged, it shall be replaced immediately.

Precision filter

1. The core part of the precision filter is the filter element, which is made of special materials, easy to damage and needs special protection.

2. When the precision filter works for a period of time, the filter element carries a certain amount of impurities. At this time, the pressure drop increases and the flow rate decreases. Impurities must be removed in time, and impurities in the filter shall be cleaned at the same time.

1. When removing impurities, pay special attention to the precision filter element that should not be deformed or damaged. Otherwise, the purity of the filter medium can not meet the design requirements.

2. Some precision filter elements cannot be reused, such as bag filter, polypropylene filter, etc

3. If the filter element is found to be deformed or damaged, it shall be replaced immediately.